Expanded Mesh Screens from Webforge
Expanded metal is one continuous single sheet of mesh produced when a flat metal plate is sheared and stretched but is left intact at the 'knuckles'. It is available in a variety of thicknesses with differing sizes and designs of the apertures.
The strands and knuckles are set at a uniform angle to the plane of the sheet. This adds strength and rigidity and distributes the load to the supporting frames.
Because there are no welds or joins it operates as a structural member that distributes loads evenly over a wide area.
The high strength to weight ratio makes it suitable for many industrial and ornamental applications.
No loose strands or welds means minimal deterioration from constant exposure or movement.
A further feature is the provision of an excellent anti-slip surface. This makes the product suitable for ramps (e.g. inclined walkways adjacent to conveyors) platforms and stair treads.
The open nature of the product provides good visibility through the mesh as well as the easy passage of air and sound whilst ensuring security and protection.
Webforge Fixing Clips
Webforge recommends that expanded walkway mesh is fixed by welding every 4th strand to the sub frame.
However, fixing clips are available to clip the mesh down if that is the preferred method. Click here to download the standard drawing for fixing clips.